Matériaux, propriétés, composition, poids

Asteria

Pleasant to touch, very stretchy, lightweight and soft material that is resistant to odours and mould. Asteria material is suitable for sublimation print.

Composition: 80% polyester, 20% elastan
Poids: 140 g/m2

Amazon

Smooth, resistant and fluid material of higher weight. Amazon is almost inelastic material with a slight brush on the reverse side providing more comfort for sportsman. Amazon material is suitable for sublimation print.

Composition: 100% polyester
Poids: 300 g/m2

Batex

Pleasant to touch, soft and smooth material resembling soft cotton. Batex has many functional properties such as quick-drying, low weight and it is almost non-creasy. Batex material is also suitable for sublimation print.

Composition: 95% polyester, 5% elastan
Poids: 180 g/m2

Cotton-espan

Elastic matt material that feels soft and non-artificial with a higher resistance to abrasion. Thanks to added elastane this material is stretchy and keeps its shape while maintaining all the good properties of natural cotton.

Composition: 89 % bavlna, 11 % elastan
Poids: 220 g/m2

Bongo

Pleasant to touch, quick-drying, lightweight and breathable material with a characteristic mesh texture. Bongo is more elastic in width and enough pliant to body shape in length. However it keeps its firm character and doesn't become slack when being wet. Bongo material is suitable for sublimation print.

Composition: 100 % polyester
Poids: 130 g/m2

Bongo light

Very light, elastic, breathable and quick-dry material with mesh texture. Stretch in width, length adapts to the shape of the body. However it keeps its solidity and doesn't get loose while wet.

Composition: 100 % polyester
Poids: 110 g/m2

Coolsense

Extremely lightweight, flexible and breathable material with a more pronounced openwork structure. The knit construction promotes rapid wicking of sweat away from the body and very fast drying. The material is soft to the touch. The slightly satin look enhances the specific structure. The material is more elastic in the width direction, in the length direction it is sufficiently adaptable to the shape of the body, but retains its strength and minimises sagging under wet load. The material is suitable for the sublimation printing method.

Composition: 100% polyester
Poids: 90 g/m2

Coolspark

Lightweight, quick-drying, breathable material with a characteristic openwork structure on the reverse side and a smooth reverse side. The knit construction promotes rapid wicking of sweat away from the body and very fast drying. The material feels soft and supple to the touch. The material is suitable for the sublimation printing method.

Composition: 100% polyester
Poids: 135 g/m2

Coolswift

Lightweight, breathable, flexible material with a fine texture on the face and slightly increased abrasion resistance. The knit construction promotes rapid wicking of sweat away from the body and subsequent drying. The material is suitable for the sublimation printing method.

Composition: 100% polyester
Poids: 130 g/m2

Coolsky

Ultra-light, quick-drying, breathable material with a fine perforated structure and a cooling effect on the reverse side thanks to a specific combination of polyester and polyamide fibres. The material is very soft and smooth to the touch, slightly satiny in appearance. It is more elastic in the width direction and sufficiently adaptable to the body shape in the length direction, but retains its strength and minimises sagging under wet load. The material is suitable for the sublimation printing method.

Composition: 100 % polyester
Poids: 85 g/m2

Denoder

Lightweight, inelastic material that is pleasant to touch and with slighly gloss finish. Its biggest benefit is its resistance to abrasion. Denoder properties are very similar to once very popular Dederon material.

Composition: 100% polyester
Poids: 100 g/m2

Denoder mesh

Extremely lightweight, inelastic material that is pleasant to touch and with a slightly gloss finish. This material has a distinct perforated structure for maximum breathability and lightness. It is highly resistant to abrasion and its properties are very similar to once very popular Dederon material. Denoder Mesh is suitable for sublimation print.

Composition: 100% polyester
Poids: 80 g/m2

Dista

Pleasant to touch, soft, smooth and stretchy material that is extremely breathable due to finely perforated texture. It also has an attractive design. Dista is suitable for sublimation print.

Composition: 93 % polyester, 7% elastan
Poids: 220 g/m2

Dryclim

Lightweight, breathable, soft and slightly stretch material with a unique dry-clim function that ensures quick drain of sweat from the body and subsequent drying. The right side is smooth, with rectangular texture. Reverse side is brushed which makes the surface smooth, slightly warm and does not stick to your body and feels comfortable. Dryclim is suitable for sublimation print.

Composition: 100% polyester
Poids: 215 g/m2

Dryclim athletic

Extremely lightweight, quick-drying and breathable material with a coarse texture on the face side and soft reverse side. Knitwear texture together with a unique dry-clim function that ensures quick drain of sweat from the body and subsequent drying. Dryclim Athletic is more elastic in width and enough pliant to body shape in length though keeping its firm character and doesn't become slack when being wet. Dryclim Athletic is suitable for sublimation print.

Composition: 100% polyester
Poids: 105 g/m2

Dryclim light

Lightened version of Dryclim material. Very breathable, soft, elastic material with a unique dry-clim function that ensures quick drain of sweat from the body and subsequent drying. The right side is smooth, with a square texture. The reverse side is brushed which makes the surface smooth, slightly warm and does not stick to your body and feels comfortable. Dryclim is suitable for sublimation print.

Composition: 100% polyester
Poids: 170 g/m2

Drystorm

Very stretchy three-layer material with DryStorm membrane resistant to abrasion and water while maintaining breathability. This material is smooth on both sides without a thermal function on the reverse side. Drystorm is soft, comfortable to wear and with matt design. Drystorm is suitable for sublimation print.

Composition: 70 % polyester, 20 % elastan, 10 % polyuretan
Poids: 270 g/m2
Colonne d'eau: 10.000 mm
Respirabilité: 7.500 g/m2/24h

Ekynox

Highly breathable knitted textile with typical texture. It is shrink-proof and resistant to odours and mould.

Composition: 99% polyester 1% carbon vlákno
Poids: 120 g/m2

Fitex

Extremely stretchy material with a property to adapt to body shape in all directions. Fitex is lightweight, quick-drying, soft and smooth. The texture is abrasion resistant and allows clean-cut technology - positility to cut off the material without any further neatening. Fitex is suitable for sublimation print.

Composition: 70 % polyester 30 % elastan
Poids: 130 g/m2

Fleece

Very pleasant, soft, stretchy and warm material that is brushed on both sides. Its main properties are low weight for a relatively strong and resistant fabric.

Composition: 100% polyester
Poids: 240 g/m2

Golford

Lightweight, stretchy, very smooth and breathable knitted fabric. Golford is resistant to washing and keeps it shape without shrinking. Golford material is suitable for sublimation print.

Composition: 100% polyester
Poids: 125 g/m2

Espan

Very stretchy, smooth and soft material with matt design allowing a free movemnt of a sportsman. Higher density of the fibre makes it less translucent and also perfectly fitting while maintaingint its original shape. Espan is suitable for sublimation print.

Composition: 86% polyester, 14% elastan
Poids: 190 g/m2

Espan athletic

Very stretchy, soft and smooth material with matt design and high fibre density. It is quick-drying, breathable and durable. Espan Athletic feels warmer than Espan but it is not brushed and therefore offering properties that are ideal to wear in changeable weather.

Composition: 86% polyamid, 14% elastan
Poids: 230 g/m2

Espan color

Very stretchy, smooth and soft material with matt design allowing a free movemnt of a sportsman. It provides optimal adaptation to body shape whilst keeping its shape memory. Available in many colour versions.

Composition: 80 % polyamid, 20 % elastan
Poids: 190 g/m2

Espan fit

Very elastic, soft fabric, medium weight with increased scratch-resistance. The fabric is pleasant, flowing, smooth on touch, matt in appearance. Thanks to high density of the fibre, it nicely fits to the body. The Espan Fit material is suitable for sublimation print.

Composition: 74 % polyester, 26 % elastan
Poids: 180 g/m2

Espan grit

Very elastic, soft fabric, higher weight with increased scratch-resistance. The fabric is pleasant, flowing, smooth on touch, matt in appearance. Thanks to high density of the fibre and maximal elasticity, it nicely fits to the body and it’s possible to achieve a small compression while keeping the fabric opaque. The fabric is suitable for method of sublimation print.

Composition: 86 % polyester, 14 % elastan
Poids: 240 g/m2

Espan shield

Very stretchy, smooth material of higher weight with similar properties as ESPAN material. It feels firmer but still allows free movement for an athlete. Higher density of the fabric makes it less transculent and provides optimal adaptation to body whilst keeping its shape memory. Espan Shield material is suitable for sublimation print.

Composition: 80 % polyester, 20 % elastan
Poids: 240 g/m2

Espan speed

Very stretchy material of a medium weight with a special knitted texture of lengthway stripes that speed-up ventilation and air outflow. This material is used for particular panels of speed jerseys. Espan Speed material is suitable for sublimation print.

Composition: 80 % polyester, 20 % elastan
Poids: 225 g/m2

Espan thermo

Very stretchy and soft material with properties that make it ideal to wear in a changeable weather. The right side is soft and matt and the reverse one is slightly brushed and therefore feels comfortable and warm while being of a small volume. Espan Thermo is suitable for sublimation print.

Composition: 88 % polyester, 12 % elastan
Poids: 267 g/m2

Jabapex

Pleasant, soft, slightly stretchy fabric. Thanks to its composition (50 % wool / 50 % polyester), it combines the advantages of natural and artificial fibres. The wool provides comfort feeling while wearing, good absorption and increased abrasion resistance. The polyester supports functional characteristics such as quicker drying time, lightness, increased wrinkle-resistance and the possibility of sublimation print with slight streak effect.

Composition: 50 % bavlna, 50 % polyester
Poids: 150 g/m2

Luvia

Extremely lightweight, inelastic textile with hydrophobic coating for maximum water resistance while maintaining breathability. It is pleasant to touch and smooth with a matt design. Luvia is suitable for sublimation print.

Composition: 100% polyester
Poids: 70 g/m2

Meryl

Very stretchy, lightweight and quick-drying material of matt design. It is soft, velvety and pleasant to touch. Meryl allows free movement for an athlete and optimal body adaptation whilst keeping its shape memory.

Composition: 75 % polyamid, 25 % elastan
Poids: 130 g/m2

Composition: 81 % polyester, 19 % elastan
Poids: 140 g/m2

Mesh bike

Very stretchy, quick-drying and breathable material with a distinct perforated texture. The structure is corse and friction resistant. Mesh bike is elastic only in width which allows enough free movement for an athlete. It is firm in length and therefore keeping its shape and pockets don’t become slack when being full and wet. Mesh bike is suitable for sublimation print.

Composition: 100% polyester
Poids: 115 g/m2

Mesh cube

Lightweight double-sided stretch material with a fine mesh square structure and low grammage. Soft and pleasant to the touch. Allows great freedom of movement and maximum adaptation to body shape. The material is suitable for the sublimation printing method.

Composition: 90 % polyester, 10 % elastan
Poids: 120 g/m2

Mikrotex

Pleasant, airy and inelastic material of a matt design. It feels velvety and smooth.

Composition: 100% polyester
Poids: 125 g/m2

Modal

Very pleasant to touch, soft, fluid and stretchy material that is resistant and keeps its shape memory. It doesn’t change its shape even after multiple washing due to its smooth surface with modal fibres that prevent its structure to wear. You will avoid grey, hard surface so typical for washing cotton knitwear including felt-like effect

Composition: 93 % modal, 7 % elastan
Poids: 310 g/m2

Noviento

Extremely lightweight, inelastic, nylon material with a surface finishing. It is wind and water resistant and pleasant to touch. Noviento is smooth, soft and in a matt design.

Composition: 100% polyamid
Poids: 45 g/m2

Pave

Lightweight material with minimal elasticity. It is pleasant to touch, soft, smooth and in a slightly gloss design. The right side is coated with hydrophobic layer which makes it water proof while maintaining its breathability. Pave is suitable for sublimation print.

Composition: 100% polyester
Poids: 140 g/m2

Pavera

Lightweight, elastic and quick-drying textile that is also breathable and durable. This material is pleasant to touch, smooth and with a matt design. Pavera is suitable for sublimation printing.

Composition: 87 % polyester, 13 % elastan
Poids: 150 g/m2

Polyester

Lightweight, breathable and slightly elastic material which is highly resistant to abrasion. Distinct ribbed texture ensures effective drain of sweat and quick drying. Polyester is suitable for sublimation print.

Composition: 100% polyester
Poids: 140-160 g/m2

Polyester tube

Soft, comfortale, stretchy and smooth material resembling very fine cotton. Thanks to polyester this material has many functions such as quick-drying, lightness and minimal wrinkle-resistance. This material is provided in a shape of a tube and designed exclusivelly for seamless scarfs production. Polyester tube is suitable for sublimation printing.

Composition: 100 % polyester
Poids: 140 g/m2

Rainflex

Lightweight two-layer membrane material with high resistance to water and wind while maintaining breathability. The material is slightly elastic, it is soft and comfortable to wear. The lower layer of the mesh texture absorbs inner moist and evenly distributes it to the membrane.

Composition: 100% polyamid + membrána (100% polyester)
Poids: 100 g/m2
Colonne d'eau: 8000 mm
Respirabilité: 2400 g/m2/24h

Rainfor

Extremely lightweight, two-layer membrane material with high resistance to water, wind while maintaining breathability.

Composition: 100% polyester + membrána (100% polyester)
Poids: 53 g/m2
Colonne d'eau: 8000 mm
Respirabilité: 2400 g/m2/24h

Rainsoft

Extremely lightweight, flexible, two-layer membrane material with a wind and water resistant finish. Comfortable to the touch, smooth, soft, matt in appearance. Available in black and fluo yellow.

Composition: 100% polyester + membrána
Poids: 53 g/m2
Colonne d'eau: 10.000 mm
Respirabilité: 7.400 g/m2/24h

Relif

Lightweight, stretchy, fluid and breathable material with a fine relief structure that ensures quick-drying and creates an interesting design. Relif is suitable for sublimation print.

Composition: 92 % polyester, 8 % elastan
Poids: 150 g/m2

Roubaix

Stretchy, soft, breathable and pleasant to touch material with a high thermal insulation even in extreme climatic conditions. The right side is smooth and matt, the reverse side is brushed and creates soft and warm fleece surface. Roubaix is shrink-proof, resistant to odours and mould. Roubaix is suitable for sublimation print.

Composition: 86 % polyester, 14 % elastan
Poids: 250 g/m2

Roubaix color

Very stretchy, soft, breathable and pleasant to touch material with a high thermal inslation even in extreme climatic conditions. The right side is smooth and matt, the reverse side is brushed and creates soft and warm fleece surface. Roubaix is shrink-proof, resistant to odours and mould. Available in many colour versions.

Composition: 86 % polyamid, 14 % elastan
Poids: 250 g/m2

Rudy

Pleasant to touch, lightweight, breathable and quick-drying material with a fine square and perforated texture. Rudy is more elastic in width and adaptable to body shape in length. However it is firm and therefore keeps its shape and does not become slack when pockets are wet and full. Rudy is suitable for sublimation print.

Composition: 95% polyester, 5 % elastan
Poids: 120 g/m2

Sali

Light comfortable material that absorbs sweat very effectively and is quick to dry. Sali is suitable for sublimation print.

Composition: 89% polyester 11% elastan
Poids: 140 g/m2

Skytech

Extremely lightweight and quick-drying material. It is breathable, with a fine square structure and also elastic to all sides but in the same time firm and shape stable. Skytech is ideal for technology of glued seams. This material also offers UV protection, chlorine resistance, breathability and second skin effect. Skytech is suitable for a sublimation print.

Composition: 60 % polyester, 40 % elastan
Poids: 83 g/m2

Silver

Lightweight, stretchy, quick-drying and breathable material with high resistance to abrasion. Silver is smooth, soft and pleasant to touch material with a matt design that offers comfortable cooling effect.

Composition: 85 % nylon, 15 % elastan
Poids: 130 g/m2

Softshell

Three-layer membrane material with high resistance to wind and water while keeping breathability. Textile is abrasion resistant. The right side is smooth, matt and pleasant to touch. Reverse side is warm and with fleece-like surface. Available in many colour versions.

Composition: 100% polyester + membrána (100% polyuretan)
Poids: 310g/m2
Colonne d'eau: 10.000 mm
Respirabilité: 3000 g/m2/24h

Soften

Very pleasant, soft, fluid and stretchy material designed to drain sweat to the surface thanks to special texture on the reverse side. This side is very soft, velvety and gives feeling of comfort and dryness while still drying. Soften is suitable for sublimation print.

Composition: 88 % polyester, 12 % elastan
Poids: 225 g/m2

Soften light

Lightweight version of Soften material. Very pleasant, soft, fluid and stretchy material designed to drain sweat to the surface thanks to special texture on the reverse side. This side is very soft, velvety and gives feeling of comfort and dryness while still drying. Soften Light is suitable for sublimation print.

Composition: 91 % polyester, 9 % elastan
Poids: 150 g/m2

Tavolara

Stretch material of a medium weight with a special knitted texture that in combination with slightly slippery surface increases resistance to abrasion. This material is quick-drying, smooth to touch, shrink-proof and with matting design.

Composition: 80 % polyester, 20 % elastane
Poids: 210 g/m2

Tchendan

Lightweight, almost inelastic material that is highly resistant to abrasion and dirt. The right side is smooth or with a fine ribbed texture and the reverse side is brushed and creates very pleasant and slightly warm feeling.

Composition: 100 % polyester
Poids: 190 g/m2

Tritech

Revolutionary material of many functional properties. It is quick-drying, lightweight, breathable, very stretchy to all sides but also durable, shape stable, abrasion and chlorine resistant. It offers UV protection and thanks to 'second skin' effect, it is very comfortable to wear. This fabric is ideal for glued seams technology. Tritech is suitable for sublimation print.

Composition: 77 % polyester, 23 % elastan
Poids: 130 g/m2

Tritech color

Revolutionary material of many functional properties. It is quick-drying, lightweight, breathable, very stretchy to all sides but also durable, shape stable, abrasion and chlorine resistant. It offers UV protection and thanks to 'second skin' effect, it is very comfortable to wear. This fabric is ideal for glued seams technology. Available in many colour versions.

Composition: 78 % polyamid, 22 % elastan
Poids: 130 g/m2

Velaro

Very stretchy material of a medium weight with a special knitted structure that allows quicker ventilation and air drain. The combination of high elastane with given weight creates a firm material with a maximal adaptability to body shape and possible compression. Velaro is suitable for sublimation print.

Composition: 67 % polyester, 33 % elastan
Poids: 220 g/m2

Windproof light

Lightweight, three-layer membrane material with high resistance to wind and water while keeping its breathability and surface coating allowing water draining. This material is stretchy, soft, pleasant to touch and in a matt design. Windproof light is suitable for sublimation print.

Composition: 100% polyester
Poids: 125 g/m2
Colonne d'eau: 10.000 mm
Respirabilité: 9.000 g/m2/24h

Windproof soft

Extremely lightweight, three-layer membrane material with a hight resistance to wind and water while keeping its breathability. Material is stretchy, it feels soft and has a matt design. Thanks to a special structure it is lighter and thinner than other membrane materials that we offer. Windproof soft is suitable for sublimation print.

Composition: 100% polyester + membrána (100% polyester)
Poids: 95 g/m2
Colonne d'eau: 5.000 mm
Respirabilité: 8000 g/m2/24h

Windproof zag

Three-layer membrane material with high resistance to wind and water while keeping its breathability. The reverse side has a special structure that allows quick water draining to the membrane. Windproof Zag is stretchy, soft, pleasant to touch and in a matt design. It is smooth on the right side and very comfortable and velvety on the reverse side. Windproof Zag is suitable for sublimation print.

Composition: 86 % polyester + 14 % elastan
Poids: 250 g/m2
Colonne d'eau: 5.000 mm
Respirabilité: 6.000 g/m2/24h

Windtex

Lightweight, stretchy, soft membrane material in a matt design that feels smooth. It is water and wind resistant while maintaining its breathability.

Composition: 100% polyester + membrána 100% polyuretan
Poids: 110g/m2
Colonne d'eau: 1.000 mm
Respirabilité: 1000 g/m2/24h

Zerowind athletic

Three-layer membrane material with high resistance to wind and water while maintaining its breathability and sweat permeability. Material is very smooth, soft, stretchy, lightweight and in a matt design. Zerowind Athletic is suitable for sublimation print.

Composition: 100% polyester
Poids: 140 g /m2
Colonne d'eau: 10.000 mm
Respirabilité: 10.000 g/m2/24h

Zerowind bike

Three-layer membrane material with high resistance to wind and water while maintaining its breathability and sweat permeability. Material is lightweight, smooth, soft, stretchy and in a matt design. Zerowind Bike is suitable for sublimation print.

Composition: 100% polyester
Poids: 120 g/m2
Colonne d'eau: 8.000 mm
Respirabilité: 10.000 g/m2/24h

Zerowind black

Warm three-layer membrane material with a high resistance to wind and water while maintaining its breathability and with a coating that allows water draining. Material is smooth, slightly elastic, it feels soft and it is in a matt design. The reverse side is thermo-insulated with a warm fleece layer.

Composition: 100% polyester
Poids: 290 g /m2
Colonne d'eau: 10.000 mm
Respirabilité: 11.500 g/m2/24h

Zerowind elastic

Three-layer membrane material with a hight resistance to water and wind and with a great breathability properties. Its surface is coated in Bio Water repellent for better water draining from the surface. This material is warm, stretchy to all sides, soft, smooth and in a matt design. It has a soft and warm fleece layer on the reverse side.

Composition: 86 % polyester, 14 % elastan
Poids: 300 g /m2
Colonne d'eau: 10.000 mm
Respirabilité: 20.000 g/m2/24h

Zerowind fine

Three-layer membrane material with a hight resistance to water and wind. It is maximum breathable and steam-water permeable thanks to a special elastic mambrane. Zerowind Fine is very smooth, soft, stretchy and in a matt design. The reverse side is slightly brushed. Zerowind Fine is suitable for sublimation print.

Composition: 100% polyester
Poids: 235 g/m2
Colonne d'eau: 8.000 mm
Respirabilité: 24.000 g/m2/24h

Zerowind light

Three-layer membrane material with a high resistance to water and wind while maintaining its breathability and sweat permeability. The material is soft, slightly stretchy and with a fine texture on the right side. Zerowind Light is suitable for sublimation print.

Composition: 89 % polyester, 11 % polyuretan
Poids: 170 g/m2
Colonne d'eau: 10.000 mm
Respirabilité: 7.500 g/m2/24h

Zerowind thermo

Warmer version of Zerowind Light material. Three-layer membrane material with a high resistance to water and wind while maintaining its breathability and sweat permeability. The material is soft, slightly stretchy and with a fine texture on the right side. The reverse side is thermo-insulated with a warm fleece layer. Zerowind Light is suitable for sublimation print.

Composition: 92 % polyester, 8 % polyuretan
Poids: 305 g /m2
Colonne d'eau: 10.000 mm
Respirabilité: 7.500 g/m2/24h